Hall effect sensor 100A 5V

Closed Loop Hall Current Sensor CCYHCS-ES5
This Hall Effect current sensor is based on the closed loop compensating principle and designed
with a high galvanic isolation between primary conductor and secondary circuit. It can be used for
measurement of DC and AC current, pulse currents etc. The output of the transducer reflects the
real wave of the current carrying conductor.

Product Characteristics Applications
 Excellent accuracy
 Very good linearity
 Small size and encapsulated
 Less power consumption
 Current overload capability
 Photovoltaic equipment
 General Purpose Inverters
 AC/DC Variable Speed Drivers
 Battery Supplied Applications
 Uninterruptible Power Supplies
 Switched Mode Power Supplies

Electrical Data
Part number Primary Rated
Current Ir (A) 10
Measuring
Range Ip(A)
Turns ratio Internal measuring
resistor ()
CYHCS-ES588-10A 10  32 1:1600 1000.1%

Supply Voltage +5V ± 5%,
Reference voltage R: +2.5VDC 0.5% FS
Electric Offset Voltage +2.5VDC 0.5% FS
Current Consumption (at Vout=0V) <20mA
Isolation voltage (50/60Hz, 1min) 3.0kV
Accuracy: 0.5% FS
Linearity: <0.1% FS
Thermal Drift of Offset Voltage, 0.2mV/°C
Response Time: < 1.0µs
Di/dt following accuracy: 100A/µs
Frequency Bandwidth (-1dB): DC ~ 200 kHz
General Data
Ambient Operating Temperature: -25°C ~ +85°C